Products

Specifications:
Switch Type: Linear
Bottom Out Force: 45g
Total Travel: 3.6mm
Top Housing: PA66
Bottom Housing: PA6
Stem Material: L4
Factory Lubrication: Yes
Spring: 22mm Single Stage
Manufacturer: Keygeek
1 Quantity = 10 Switches

Specifications:
Switch Type: Linear
Operating Force: 48g
Bottom Out Force: 53g
Total Travel: 3.8mm
Top Housing: PA66
Bottom Housing: PA66
Stem Material: M3
Factory Lubrication: Light Lubing
Spring: 20mm Single Stage
Manufacturer: Keygeek
1 Quantity = 10 Switches

Extra gaskets for OC-62 sold in sets of 12. 

Brush for lubrication.

Flat head specifications:
Vertical Length: 7mm
Horizontal Length: 3.7mm

Sharp specifications:
Vertical Length: 7mm

1 Pack    =    110 Spring

• Description
  • When spring is put into the switches, it will be straight (not slanted)
  • This will allow "Uniaxial Compression"
  • Switches will have a "Uniform" typing feel
  • There will be much "Less spring noise"
• Our research and development team had found a significant way to improve the springs so that it would reduce the spring noise & improve the typing feel
• Robust QC has been done to achieve less than +/- 1 Deviation
• Leveling process was done
• The length was specifically designed for people who want to add "Great amount" of bouncy feeling to the switches
  

• Specifications
• Material :  Sus 304 (High-Quality Stainless Steel 304 from Japan)
• Length: 17.5mm

Specifications

• Material :  PBT+ABS
• Profile :  Cherry-profile      
• Legends: Double-shot
• Thickness: 1.5mm±
  

Specifications:
Switch Type: Linear
Bottom Out Force: 60g
Total Travel: 4.0mm
Top Housing: Nylon
Bottom Housing: Nylon
Stem Material: POM
Factory Lubrication: Yes
1 Quantity = 10 Switches

Contains: 
1 Stabilizer set

Specifications:
- This is a screw-in stabilizer using a new silicon double shot mold.

- Both the stem and housing are injection-treated. This process effectively reduces rattling sounds that are made when:
1. the stem makes contact with the housing
2. the wires makes contact with the stem

- This product is based on Cherry stabilizers, and there is a Swagkeys noise-reduction patent applied stem and housing that is doubleshot.

- No wire-balancing required!

Swagkeys Switch Films V2

• Description
• A film made out of a foam-like material that fits between the top and bottom housing

• Thickness
• 0.3 mm 

• Compatibility
• Fits with all the switches
• NOTE :  

• Fits with most switches. Although fitment may be tight, the material is very easily compressed
• Improved the interference of the bottom part of the film when the switch is removed from the plate.

• Advantages
• This type of gasket film may reduce vibration which will produce a better sound
• Due to the material and the 0.3mm thickness of the film, it can compress and fit into most switches, reducing housing and stem wobble

Specifications:
Switch Type: Linear
Bottom Out Force: 58g
Total Travel: 3.7mm
Top Housing: Nylon
Bottom Housing: Nylon
Stem Material: POM
Factory Lubrication: Unlubed
Spring: 20mm Single Stage
Manufacturer: Gateron
1 Quantity = 10 Switches

USB-C to A cable from Swagkeys
Magnetic ends
18W Charging / 480 mbps data transfer speed

Specifications:
Switch Type: Linear
Bottom Out Force: 58g
Total Travel: 3.5mm
Top Housing: Nylon
Bottom Housing: Nylon
Stem Material: POK
Factory Lubrication: Yes
Spring: 20mm 
Manufacturer: SWK
1 Quantity = 10 Switches

Specifications:
Switch Type: Linear
Bottom Out Force: 50g
Total Travel: 4.0mm
Top Housing: Nylon
Bottom Housing: Nylon
Stem Material: POM
Factory Lubrication: Yes
Spring: 20mm Single Stage
Manufacturer: SWK
1 Quantity = 10 Switches

Specifications:
Switch Type: Linear
Bottom Out Force: 50g
Total Travel: 4.0mm
Top Housing: Nylon
Bottom Housing: Nylon
Stem Material: POK
Factory Lubrication: Yes
Spring: 20mm Single Stage
Manufacturer: SWK
1 Quantity = 10 Switches