Products

Stub stems are produced by a community member with BSUN to be a replacement stem. They produce a long pole tactile with a large round bump. A community favorite combination is using Cherry MX2A housings with stub stems. 

Specifications:
Switch Type: Tactile
Stem Length: 13.55mm
Stem Material: POM
Manufacturer: BSUN
1 Quantity = 110 Stems

SW Acrylic Keyboard Tag V2

Enhance your keyboard bag with this unique name tag.

Use this name tag on Keyboard Carrying bag, backpacks, suitcases, and other bags.

The acrylic surface can be wiped with an alcohol swab to write new content.

Made of acrylic with a protective film to prevent scratches. 

Remove the film by peeling from the edge with your fingernail.

Please remove the protective film before use.

Brush for lubrication.

Flat head specifications:
Vertical Length: 7mm
Horizontal Length: 3.7mm

Sharp specifications:
Vertical Length: 7mm

1 Pack    =    110 Spring

• Description
  • When spring is put into the switches, it will be straight (not slanted)
  • This will allow "Uniaxial Compression"
  • Switches will have a "Uniform" typing feel
  • There will be much "Less spring noise"
• Our research and development team had found a significant way to improve the springs so that it would reduce the spring noise & improve the typing feel
• Robust QC has been done to achieve less than +/- 1 Deviation
• Leveling process was done
• The length was specifically designed for people who want to add "Great amount" of bouncy feeling to the switches
  

• Specifications
• Material :  Sus 304 (High-Quality Stainless Steel 304 from Japan)
• Length: 17.5mm or 20mm

SW Swagkeys Plate Support Fork

This is a new plate fork made with Swagkeys' own mold. It is used to support plates when putting switches in without foams.

Swagkeys Switch Films V2

• Description
• A film made out of a foam-like material that fits between the top and bottom housing

• Thickness
• 0.3 mm 

• Compatibility
• Fits with all the switches
• NOTE :  

• Fits with most switches. Although fitment may be tight, the material is very easily compressed
• Improved the interference of the bottom part of the film when the switch is removed from the plate.

• Advantages
• This type of gasket film may reduce vibration which will produce a better sound
• Due to the material and the 0.3mm thickness of the film, it can compress and fit into most switches, reducing housing and stem wobble

SW WoB Keycap Set specifications:

• Material: ABS 
• Profile: Cherry-profile 
• Legends: Double-shot
• Thickness:1.5mm±

Onyx switches are the newest collaboration switch between Swagkeys and Gateron. They are full travel linears that utilize the custom designed molds that have silicone inserts in the bottom housing that act as switch films to improve the sound and feel of the switch. It is similar to the previous SW x Gateron Deeping switch with improved factory lubing and a new stem material that produces a different sound signature. Once lubed (either manually or factory lubed) these are smooth linears with a medium weight spring and a nice loud sound profile. They are available in both unlubed and factory lubed options.

Specifications:
Switch Type: Linear
Bottom Out Force: 55g
Total Travel: 4mm
Top Housing: Nylon
Bottom Housing: Nylon
Stem Material: UMPWPE (12.75mm)
Factory Lubrication: None
Spring: 19.5mm Single Stage
Manufacturer: Gateron
1 Quantity = 10 Switches

Lubed Onyx Typing Sounds:

Unlubed Onyx Typing Sounds:

Note: Typing sound videos are for reference and comparison. Actual sound will vary based on your keyboard, plate choice, use of foam, environment etc.

Specifications

• Material :  PBT+ABS
• Profile :  Cherry-profile      
• Legends: Double-shot
• Thickness: 1.5mm±

The pictures are an example,
and it may differ from the actual product depending on factors such as lighting.

Kitting:

USB-C to A cable from Swagkeys
Magnetic ends
18W Charging / 480 mbps data transfer speed

Nanch is a precision driver set that is used for multiple purposes.

Swagkeys has only added bits that are mainly used in custom keyboards and added some retro gaming controller's design elements to the case.

 The tip of the driver can be extended for deeper screws.

SPECIFICATIONS
Manufacturer: Swagkeys

• Beige Base:
  • Material: ABS
  • Method: Doubleshot
• Tulip Kit
  
  • 3+ Color Material: ABS Outerlayer+PBT Underlayer
  • 3+ Color Method: Doubleshot + Dye-subbed Sublegends
  • 2 Color Material: ABS
  • 2 Color Method: Doubleshot

Profile: Cherry
Number of kits: 3

SALES METHOD:

Instock 

SWK Cheddar are the first full 4.0mm travel switch available from SWK. It has a pole bottom with materials that produce a slightly deeper sound than other SWK offerings while not being too muted. The name comes from their yellow/orange stem and bottom housing.

Specifications:
Switch Type: Linear
Bottom Out Force: 50g
Total Travel: 4.0mm
Top Housing: Nylon
Bottom Housing: Nylon
Stem Material: POK
Factory Lubrication: Yes
Spring: 20mm Single Stage
Manufacturer: SWK
1 Quantity = 10 Switches

Peony are HE switches produced by SWK. They are designed for accuracy and consistency with an HE PCB. 

Specifications:
Switch Type: Linear
Bottom Out Force: 39g
Total Travel: 3.4mm
Top Housing: PC
Bottom Housing: POK
Stem Material: POM
Factory Lubrication: Yes
Spring: 14mm Single Stage
Manufacturer: SWK
1 Quantity = 10 Switches

NOTE THESE ARE FOR HE PCBS NOT MX PCBS

Specifications:
Switch Type: Linear
Bottom Out Force: 52g
Total Travel: 3.4mm
Top Housing: POK
Bottom Housing: LY
Stem Material: :LY
Factory Lubrication: Yes
Spring: 22mm Single Stage
Manufacturer: Keynation - subsidy of BSUN
1 Quantity = 10 Switches

Specifications:

• 900x400x4mm
• Smooth cloth surface
• Stitched edges
• Non-Slip Rubber bottom
  
• Designer: Influ and Chroma.moma
  

From the Designer:
Illustrated in crisp vector lines, this design channels tengu imagery through the expressive form of oni mask aesthetics.

JST Connection 
Red or White Soldermask (Random)
140mm JST Cable